It's Easy To See The
Difference

ProCoat Product Line

Each of the products presented here are intended to be used in one of two ways:

In the restoration of an entire acoustical ceiling system
As part of an acoustical ceiling preventative maintenance program

Before utilizing any of the following products, it is recommended that the “ProCoat Application Guide” be reviewed for specific directions. Contact your local dealer or call (781) 767-2270



ProCoustic can be tinted to pastel colors or formulated to any of the deeper tones.

ProCoustic Acoustical Tile & Ceiling Coating

ProCoustic is a specialty coating designed to restore structurally sound ceiling surfaces. At the same time, grids (t-bars), air diffusers, and speaker plates can be coated, giving the entire ceiling a completely new appearance. This product is water-based and available in both five-gallon and one-gallon pails.

ProCoustic is a non-toxic coating, NOT a chemical cleaner, paint or a dye. ProCoat is the environmentally preferred option.

  • Provides better than new tile appearance. 
  • Improves light reflectance. 
  • Increases acoustical values.
  • Class A fire-rated material.
  • Tiles will not warp or stick to the grid system.
  • Non-Toxic.
  • Environmentally preferable

Back to Top

ProCoat Acoustical Tile Restorer in Aerosol

This unique one-step product presents the ideal, cost-effective solution to water stains, finger prints, and dirt smudges that typically lead to costly tile replacement. Makes preventative maintenance of acoustical ceilings possible. Available in three primary colors; white, ultra-white, and off-white.

  • Primer and top coat in one application.
  • Dries to a flat finish.
  • Maintains acoustical and fire retardant characteristics.

Back to Top

ProGridClean.jpg

ProCoat Hard Surface Cleaner
(Grid Cleaning Solution)

On non-porous materials (i.e., t-bars, air diffusers, etc.) it may be necessary to pre-clean the surface to ensure that the coating will bond properly and to guard against bleed-through discoloration. In such cases, this product is an inexpensive, fast acting solution that can also serve as a degreaser.
  • Packaged in concentrate.
  • Does not leave a film on the surface.
  • Reduces with water.

Back to Top

ProCoat Acoustical Tile & Ceiling Cleaner

This two-part product enables the applicator to neutralize heavy nicotine, prior to applying a water-based coating such as ProCoustic, without damaging the acoustical integrity of the ceiling tile. Packaged separately, the concentrate and the activator are mixed with one gallon of warm water, and lightly sprayed on the ceiling surface before the coating is applied.

  • Packaged in small bottles in concentrate.

  • Requires less shipping cost and storage space.

 

Back to Top

ProPoly.jpg

ProCoat PolyCover

Inexpensive and lightweight, Procoat's PolyCover is easy to hang on walls and drape on furnishings. Perfect for protection against dust and spills. Is packaged in 400 foot rolls, 1-mil thick, and unfolding into a 20 foot width.
  • Unfolds easily without clinging.
  • 1-Mil thick in 400 foot roles.
  • Unfolds to a 20 foot width.
  • Makes cover-up much easier

Back to Top

ProCoat PolyStick

Taping the seams of overlapping sheets of plastic in order to contain dirt/dust, is both time-consuming and costly. Instead, use ProCoat’s PolyStick in aerosol to ensure tight/fast closure and to minimize clean-up expense. Sprays from the tip in a flat fan for more precise control.
  • Sprays from the tip in a flat fan for more precise control.
  • Ensures tight/fast closure.

Back to Top

Soft Sweep Broom/Pole

Remove soot and dirt build-up around vents, tiles and ceiling mounted fixtures easily. Does not smudge dirt as would traditional brooms. Soft Sweep extension pole extends to 11 feet.
  • Pole extends to 11 feet.
  • Will not cause smudging
  • Light weight.
  • Washable
  • .Inexpensive.

Easy Reach Spray Adapter

No more climbing ladders with an aerosol can to touch up water stains. With the aid of an extension pole, this tool allows this maintenance work to be done from the floor. Works with any aerosol product.




  • Saves time and labor
  • Limits ladder-accidents
  • Avoids direct contact with fumes
  • Adjusts to most angles
  • Sturdy construction

 

Easy Reach Masking Remover

Designed to easily remove masking materials from ceiling mounted fixtures such as lights, sprinkler heads, security cameras and other areas that were masked prior to applying the acoustical coating.

 

  • Saves time and money
  • Safer than using ladders
  • Works well with durable 8' pole
  • Light weight
  • Rubber pincer grips hold tight

 



 

Enter your email address below to 
subscribe to the ProCoat Products Newsletter

Subscribe | Unsubscribe
Privacy Statement


Copyright ©2001 ProCoat Products, Inc.-All Rights Reserved
260 Centre Street   Suite D  Holbrook, MA 02343
Telephone: 781-767-2270 Fax: 781-767-2271
Email: info@procoat.com